Pip Menu - Digital Projection Titan Pro Series 3 Installation And Quick Start Manual

Digital Projection
Titan Pro Series 3

PIP menu

Two images can be combined, in three different ways using this feature. The PIP menu is available
only when Setup > System > Configuration
Option
•
Select PIP , PAP , or POP mode from the drop-down list.
Input
•
Select an Input from the drop-down list. The inputs are divided into two groups – the main image
must be from one group, and the sub-image must be from the other group.
•
Group A: ,
CVBS 1, CVBS 2
•
Group B:
COMPONENT, VGA
Size
•
Select a size for the sub-image from the drop-down list.
Position
•
Select one of the preset positions for the sub-image from the drop-down list.
Custom Position
•
If you have chosen from the
Custom
position the image manually.
PIP: Picture In Picture
Rev D November 2012
is set to PIP .
and
S-VIDEO 3G-SDI
, , and
DVI HDMI DVI-A
drop-down list, then you can use the sliders to
Position
PAP: Picture And Picture
A TOUR OF THE MENUS
POP: Picture Opposite Picture
Operating Guide
Notes
Main Menu
PIP
This menu is available only when
> >
Setup System Configuration
set to .
PIP
, and are NOT
PIP PAP POP
possible when Input is set to
Pattern .
In these examples, the flower is the
main image, and the window is the
sub-image, shown at the Medium
size setting.
The two images MUST be from
different .
Input groups
The settings apply ONLY
Position
to mode. PAP and POP are
PIP
always as shown in these examples.
is
Test
Op 14