Pip Menu - Digital Projection HIGHlite 660 3D Series Installation And Quick Start Manual

Digital Projection HIGHlite 660 3D Series

PIP menu

Two images can be combined, in three different ways using this feature. The PIP menu is available
only when > >
Setup System Configuration
Option
•
Select , , or mode from the drop-down list.
PIP PAP POP
Input
•
Select an Input for the sub-image from the drop-down list. The inputs are divided into two groups
– the main image must be from one group, and the sub-image must be from the other group.
•
Group A: COMPOSITE 1, COMPOSITE 2
•
Group B: ,
COMPONENT, VGA DVI
The inputs from the same group as the main input signal will appear disabled in the list.
Size
•
Select a size for the sub-image from the drop-down list.
Position
•
Select one of the preset positions for the sub-image from the drop-down list.
Custom Position
•
If you have chosen from the
Custom
position the image manually.
PIP: Picture In Picture
Operating Guide
is set to .
PIP
, S-VIDEO and 3G-SDI
, and
HDMI DVI-A
drop-down list, then you can use the sliders to
Position
PAP: Picture And Picture
USING THE PROJECTOR
POP: Picture Opposite Picture
Notes
Main Menu
PIP
This menu is available only when
> >
Setup System Configuration
set to PIP .
PIP , PAP and POP are NOT
possible when is set to
Input Test
.
Pattern
The Position settings apply ONLY
to mode. PAP and POP are
PIP
always as shown in these examples.
Rev E February 2015
page 74
is