Digital Projection HIGHlite 740 Series
PIP menu
Two images can be combined, in three different ways using this feature. The PIP menu is available
only when
>
>
Setup
System
Configuration
Option
•
Select
,
, or
mode from the drop-down list.
PIP
PAP
POP
Input
•
Select an
Input
for the sub-image from the drop-down list. The inputs are divided into two groups
– the main image must be from one group, and the sub-image must be from the other group.
•
Group A:
COMPOSITE 1, COMPOSITE 2
•
Group B:
,
COMPONENT, VGA
DVI
The inputs from the same group as the main input signal will appear disabled in the list.
Size
•
Select a size for the sub-image from the drop-down list.
Position
•
Select one of the preset positions for the sub-image from the drop-down list.
Custom Position
•
If you have chosen
from the
Custom
position the image manually.
PIP: Picture In Picture
Operating Guide
is set to
.
PIP
,
S-VIDEO
and
3G-SDI
,
and
HDMI
DVI-A
drop-down list, then you can use the sliders to
Position
PAP: Picture And Picture
USING THE PROJECTOR
POP: Picture Opposite Picture
Notes
Main Menu
PIP
This menu is available only when
Setup
>
System
>
Configuration
set to
PIP
.
,
and
are NOT
PIP
PAP
POP
possible when
Input
is set to
Test
Pattern
.
The
settings apply ONLY
Position
to
PIP
mode. PAP and POP are
always as shown in these examples.
Rev I February 2015
page 65
is