Digital Projection
HIGHlite 660 Series
PIP menu
Two images can be combined, in three different ways using this feature. The PIP menu is available
only when
Setup
>
System
>
Configuration
Option
•
Select
PIP
,
PAP
, or
POP
mode from the drop-down list.
Input
•
Select an
Input
from the drop-down list. The inputs are divided into two groups – the main image
must be from one group, and the sub-image must be from the other group.
•
Group A:
,
CVBS 1, CVBS 2
•
Group B:
COMPONENT, VGA
Size
•
Select a size for the sub-image from the drop-down list.
Position
•
Select one of the preset positions for the sub-image from the drop-down list.
Custom Position
•
If you have chosen
from the
Custom
position the image manually.
PIP: Picture In Picture
Rev E November 2012
is set to
PIP
.
and
S-VIDEO
3G-SDI
,
,
and
DVI
HDMI
DVI-A
drop-down list, then you can use the sliders to
Position
PAP: Picture And Picture
A TOUR OF THE MENUS
POP: Picture Opposite Picture
Operating Guide
Notes
Main Menu
PIP
This menu is available only when
>
>
Setup
System
Configuration
set to
.
PIP
,
and
are NOT
PIP
PAP
POP
possible when
Input
is set to
Pattern
.
In these examples, the flower is the
main image, and the window is the
sub-image, shown at the
Medium
size setting.
The two images MUST be from
different
.
Input groups
The
settings apply ONLY
Position
to
mode. PAP and POP are
PIP
always as shown in these examples.
is
Test
Op 13