Advertisement
STEP 1 Assemble Upright Frame
TWO PEOPLE ARE REQUIRED TO ASSEMBLE THIS STEP.
1. Cap two End Caps (38) to the Base Frame Leg (1). Attach Rear Upright Frame
(4) to the Base Frame Leg (1) using eight 3/8" Chromed Washers (62), and
eight 3/8" Chromed Nylon Nuts (68).
2. Attach Top Cross Support (8) to the Rear Upright Frame (4) using four 3/8" X 2-
1/2" Hex Bolts (52), eight 3/8" Chromed Washers (62), and four 3/8" Chromed
Nylon Nuts (68).
3. Attach Bottom Cross Support (9) to
the Rear Upright Frames (4) using
four 3/8" X 2-1/2" Hex Bolts (52),
eight 3/8" Chromed Washers
(62), and four 3/8" Chromed
Nylon Nuts (68).
38
TO EASE THE ASSEMBLY PROCESS.
DO NOT TIGHTEN ANY BOLTS UNTIL
INSTRUCTED.
62
68
47
62
4
68
68
62
62
68
62
1
6
52
62
52
62
8
52
47
62
47
68
62 52
62 52
62
9
38
68
38
62
4
62
52
68
52
62
38
62
1
Advertisement
