Program 300 - Plu Description Programming - Sam4s ER-390M Operation And Program Manual

Program 300 - PLU Description Programming

Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select 'No' in system
option #30 (See "System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 3 0 0, press the SBTL key.
3
3. Select the PLU you wish to program in one of the following ways:
•
Press a PLU on the keyboard, or
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
•
For a barcode item, scan the barcode.
4. If you are programming using alpha overlay;
Type up to 18
descriptor keys
or,
Enter up to 18
three-character codes
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
CASH
98• Program Mode Programming
0 0 SBTL
PLU
up to 15 digits
X/TIME
X/T IME
PLU
ER-390M Electronic Cash Register AU