Chapter 6: Engineering Mode; Using Engineering Mode; Engineering Mode Overview - Matrix T5X-04 Service Manual

6.1 USING ENGINEERING MODE

1. To enter Engineering Mode, hold the INCLINE DOWN and SPEED DOWN keys for three seconds until Manager Mode appears on the middle LED dis-
play.
2. Press any UP arrow key and Engineering Mode will appear on the display.
3. Press ENTER once Engineering Mode is displayed.
4. To scroll between programs in the Engineering Mode, press any UP or DOWN arrow key.
5. Press ENTER to modify the program settings once displayed.
6. Press any UP or DOWN arrow key to change value.
7. Once program setting is correct, press ENTER to save.
8. Press the EMERGENCY STOP to exit Engineering Mode.

6.2 ENGINEERING MODE OVERVIEW

CUSTOM SETTING DEFAULT
Disable Errors ON
Elevation Minimum 28
Elevation Maximum 230
Auto Calibration N/A
Speed Units MILE
Pause Time 30 SECONDS
Machine Type N/A
RPM Parameter 2055

CHAPTER 6: ENGINEERING MODE

MINIMUM MAXIMUM
ON OFF
20 239
20 239
N/A N/A
MILE KILOMETER
5 SECONDS 10 MINUTES
N/A N/A
100 3000
UNIT DESCRIPTION
N/A Resets error log.
Accomplished by pressing
INCLINE DOWN and SPEED
DOWN for 3-5 seconds.
N/A Controls the low incline
parameter.
N/A Controls the high incline
parameter.
N/A This function is to calibrate the
treadmill incline.
DISTANCE Measurement unit used for
calorie calculations, distance,
and speed.
SECOND / MINUTE Controls the maximum time the
treadmill can be paused during
a workout.
N/A Sets the machine ID, not
editable.
N/A Checks and adjusts the low
speed.
13