How To Enter Into The Engineering Mode - Matrix MX-T3x Service Manual

MX-T3x OPERATION MANUAL- Engineer mode

How to enter into the engineering mode?

ENGINEERING MODE
Engineering screens allow the viewing and editing of variables that would be necessary
for a club operator/manager to customize. Unless otherwise noted, engineering screens
consist of the initial screen, the editing or action screen, and the saving screen. The
initial screen displays the variable type, and in most cases, the current value. Edit or
action screens are where the editing of the variable take place. The saving screen
indicates the variable is being saved.
To access the Engineering screens press and hold the ELEVATION UP and SPEED
DOWN buttons for three seconds. The display will now display 'Engineering Mode'.
Use the ELEVATION UP or DOWN arrows to scroll through the different engineering
screens.
Press SELECT to edit the selected engineering screen.
Use the SPEED UP or DOWN arrows to set the variable.
Press START to save the selected variable.
1. Press & Hold both "ELEVATION
UP" and "SPEED DOWN" at the
same time for 3-5 sec. Then, the
display will show "MANAGER
MENU".
2. Press the "ELEVATION UP or
DOWN" to select you want and press
the "SELECT" key enter.
20