Chapter 6: Engineering Mode; Engineering Mode Overview; Engineering Mode - Calibration - Matrix T1XE-04 Service Manual

6.1 eNGiNeeriNG mode oVerVieW

The Engineering Mode allows the club owner to keep track of the technical settings and error history for the treadmill.
1) To enter Engineering Mode, press ENTER, 2, 0, 0, 1, ENTER on the number keypad. Engineering Mode will appear on the display (Figure
A).
2) Select the setting that needs to be changed, and follow the prompts to change.
3) Press the ENTER key once the desired setting is correct to save.
4) Press the HOME key on the display or press the EMERGENCY STOP key to return to normal operation.
6.2 eNGiNeeriNG mode - CalibraTioN Tab
eNGiNeeriNG mode
Calibration
20

CHaPTer 6: eNGiNeeriNG mode

fiGUre a
fUNCTioN & defaUlTS
Auto Calibration
Incline Minimum
Default: 4000
Incline Maximum
Default: 29000
deSCriPTioNS
This option calibrates the elevation parameters.
This option controls the minimum elevation
parameter.
This option controls the maximum elevation
parameter.
modified
Range: 2500 - 12000
Range: 25000 - 32700