Code Authority; Device Events; Panel Configuration - Honeywell Tuxedo Touch WIFI Installation And Setup Manual

ICON
4. If authority levels are correct, press BACK
or Home to exit the menu.
5. If changes are necessary, select the line to
be changed and the level of user to have
access; then press Apply.
Residential Panels and Screen Security
Authority Level in Panel
System Master
Partition Master
Standard User
Arm Only
Guest
Duress

Code Authority

The Code Authority screen displays User Names and Partition Authority Level for the User Code. To
view the Code Authority level, do the following:
ICON
1. Press the Code Authority icon.
2. Enter the 4-digit User Code for the user
that you want to obtain Authority Level
information about. Press BACK.

Device Events

Your keypad has the ability to record events in a history log. Each event is recorded with the time and
date of its occurrence. To view the Device Events, perform the following:
ICON
1. Press the Device Events icon. A list of
events is displayed.

Panel Configuration

The Panel Configuration screen displays the configuration of the panel. To view the panel
configuration, do the following:
SCREEN
1. Press the Panel Configuration
icon.
2. If correct, press Back to return to
"System Setup" screen.
System Setup (cont'd)
ACTION
Access Level Chosen in Keypad Screen Security
Matching
Authority
Level in
Keypad
Master No
Master No
Normal No
N/A No
Guest No
N/A No
ACTION
ACTION
ACTION
The Screen Security screen is re-displayed listing
any changes.
Note: The User Levels listed on this screen match
the User Levels in commercial panels. See the
following chart for corresponding User Levels in
Residential Panels
Yes Yes Yes
Yes Yes Yes
No No Yes
No No No
No No No
No No No
Note: If the User Code entered is not active in the
system, an "INVALID" message will be displayed.
To view a record of events in a history log, slide the
scroll bar down. The Date, Time and Description of
each event is displayed.
NOTES
A "Panel Configuration" screen is displayed providing details
of your system.
Delete clears the configuration from the keypad and reloads
the panel configuration into the keypad from the panel.
After you press Delete, a confirmation screen is displayed.
25
NOTES
.
Yes Yes
Yes Yes
Yes Yes
No No
Yes Yes
No No
NOTES
NOTES