Adjust The Screen Timeouts; Clean Screen - Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Adjust the Screen Timeouts

When the keypad is left idle, it automatically:
• Turns the "Backlight Off After" the selected backlight off time has expired (unless "Never" option is
selected).
• returns to the "Home" screen after the selected "To Homepage After" time has expired (unless
"Never" option is selected), and
• if enabled, the "Auto Slideshow After" time begins the slide show.
To select the desired screen timeouts, do the following:
ICON
1. From the "Home" screen, press the Setup
icon.
2. Press the Disp & Audio Setup icon.
3. Enter your Authorized Code.
4. Press the desired selection from the drop-
down list displaying the time period for each
option.
5. Press the Save icon to save the settings.
If changes are made, when you exit a pop-up window
displays: "Information Settings saved"

Clean Screen

With the exception of normal cleaning, the keypad is maintenance free.
Press the "Display and Audio" icon, and do the following:
ICON
1. Press the CLEAN SCREEN icon. A pop-up
window displays
disabled so that you may wipe the screen clean.
Please use a damp, soft cloth. DO NOT use any
liquids, sprays, or ammonia-based cleansers.
Press CONTINUE to disable touchscreen
*Panics cannot be initiated during this process*
2. Press Continue or Cancel to exit.
3. Press the Save icon.
IMPORTANT: Do not use an abrasive cleaning agent or abrasive cloth when cleaning the keypad or
damage to the touch screen may occur.
The Emergency screen cannot be accessed while running in the clean screen mode.
Setup (cont'd)
ACTION
ACTION
"
Touch Screen has been
."
17
NOTES
Settings include:
•
Backlight Off After X time
•
Return To Homepage After X time
•
Auto Slideshow After X time.
Notes
• The "To Homepage After" Time option is only
available if the Screen Blackout (EN50131
Display) option is not enabled by the installer.
• When in EN50131 mode, "Auto Slideshow
After" is preset to "1" minute and can not be
changed.
NOTES
When the "Continue" icon is pressed the
message "Touch Screen Disabled for =30
Seconds" is displayed. During these 30
seconds the touch screen should be wiped
clean of fingerprints using a mild soap solution
and a soft cloth. When the counter reaches
zero, the window automatically closes and the
touch screen is active.