Honeywell Tuxedo Touch Wi-Fi User Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Security System
  5. Tuxedo Touch Wi-Fi
  6. User manual

Honeywell Tuxedo Touch Wi-Fi User Manual

Home automation system
Hide thumbs Also See for Tuxedo Touch Wi-Fi:
Table of Contents

Advertisement

Quick Links

800-16573V1 7/14 Rev. A
Tuxedo Touch
H
o
m
e
A
u
t
o
H
o
m
e
A
u
t
o
W
i
-
W
i
-
™
m
a
t
i
o
n
S
y
s
t
m
a
t
i
o
n
S
y
s
t
User Guide
®
®
F
i
F
i
e
m
e
m

Advertisement

Table of Contents
loading

Related Manuals for Honeywell Tuxedo Touch Wi-Fi

Summary of Contents for Honeywell Tuxedo Touch Wi-Fi

  • Page 1 ® ® Tuxedo Touch ™ User Guide 800-16573V1 7/14 Rev. A...
  • Page 3 Z-Wave devices are identified by the Z-Wave logo and can be purchased from your local retailer. ® Z-Wave is a registered trademark Sigma Designs, Inc. and/or its subsidiaries.

  • Page 4: Table Of Contents

    Table of Contents ABOUT THE SYSTEM ......................1 Introduction ........................1 Tuxedo Features..................... 1 Navigating through the Tuxedo ................3 SD Card for Multimedia and Software Updates ............3 Data Entry Keyboard ....................3 Navigation Icon Descriptions .................. 4 LED Operation ......................5 Messages .......................
  • Page 5 Table of Contents How to Arm the System ..................25 How to Bypass Zones ..................... 27 How to Disarm the System ..................27 User Codes ........................29 Authority Levels ...................... 29 How to Add a User ....................30 How to Delete a User ....................30 Fire and Carbon Monoxide Alarm Operation ............
  • Page 6 Table of Contents REMOTE SERVICES ......................43 Using Total Connect with Tuxedo (Remote Services) ..........43 Controlling Automation (Z-Wave) Devices Remotely ..........43 Creating Scenes in Total Connect ................44 Viewing and Controlling Total Connect Scenes from Tuxedo ......... 44 Enabling Devices for Total Connect ................

  • Page 7: About The System

    About the System Introduction Congratulations on your ownership of a Honeywell Tuxedo Touch™ Home Automation System which ® ® combines home-automation and home security. Equipped with Wi-Fi capability and built-in Z-Wave technology, Tuxedo can be retrofitted into home electronic devices and systems without interference from common household wireless electronics.
  • Page 8 About the System (cont'd) Feature Description non-security mode for demonstration purposes only. Automation (Occupancy) Mode is used to simulate a security system when a security system is not connected. Automation mode allows you to set the Tuxedo in two conditions: Residential and Commercial. Scenes can be set to trigger based on the status of these settings.

  • Page 9: Navigating Through The Tuxedo

    In some extreme cases, the Tuxedo may need to be reset. NOTE: Honeywell is not responsible for any loss of personal information (files, videos, photos, etc.) Memory Card Insertion Insert the memory card (SD/SDHC Card) as shown.

  • Page 10: Navigation Icon Descriptions

    About the System (cont'd) Navigation Icon Descriptions To aid in the navigation through the Tuxedo screens, a set of user-friendly icons has been provided. The appearance and function of these icons are described below. ICON ICON TITLE FUNCTION ICON ICON TITLE FUNCTION Accesses Product “Product...

  • Page 11: Led Operation

    About the System (cont'd) LED Operation The Tuxedo has three LEDs as follows: SD/SDHC CARD Slot ARMED (RED) LED ON – System is armed. OFF – System is not armed. READY (GREEN) LED ON – System is disarmed and ready to arm. OFF –...

  • Page 12: Messages

    About the System (cont'd) Messages The Tuxedo can record voice messages for others on the premises. The number of messages is not limited; however, the total time of all messages added together cannot exceed 120 seconds. Note: The voice messages are stored in the memory and all messages are lost if the keypad loses power or if it is reset.
  • Page 13 About the System (cont'd) In Commercial mode, the Arming options are: Open, Close, and Night. To enter Residential mode (automation), from the “Home” screen press the following icons: Setup > System setup > CS Setup . Enter your authorized code and press the Options icon;...
  • Page 14 About the System (cont'd) 1. Select Safe Mode and then press Apply. 2. Press the OK icon. 3. To exit, press the safe mode bar and press Yes to return to Normal Mode. While in the Safe Mode, the Home screen displays the Security, Panic, and Message Icon. A •...

  • Page 15: Using Pictures, Cameras And Videos (Multimedia)

    Using Pictures, Cameras and Videos (Multimedia) Picture Setup Tuxedo can display your personal photo(s) on the Home screen as wallpaper or in a slide show format. To set up a slide show of pictures, do the following: Insert your personal media SD card (with stored picture files). Formats supported are .bmp, png or .jpg files.

  • Page 16: Video Setup

    Using Pictures, Cameras and Videos (Multimedia) (cont’d) Video Setup Video Converter is required to convert videos for proper playback on the Tuxedo. Use an Internet search engine to locate and download a Video Converter, then follow the steps in the Video Converter Instructions (provided in the carton).

  • Page 17: Viewing Cameras

    Using Pictures, Cameras and Videos (Multimedia) (cont'd) Viewing Cameras Cameras can be viewed locally from the Tuxedo keypad. To setup and view cameras for use with WiFi enabled devices and Total Connect, refer to the Remote Access section later in this document. Camera functionality is supplementary only and has not been evaluated by UL.

  • Page 18: Adding Cameras To The System

    Using Pictures, Cameras and Videos (Multimedia) (cont’d) Adding Cameras to the System Note: Tuxedo must be Wi-Fi connected to the home router before adding cameras. Initial camera setup cannot be performed over a wireless connection. The Camera feature allows you to enroll cameras and view up to four cameras at one time using the quadrant view feature.
  • Page 19 Using Pictures, Cameras and Videos (Multimedia) (cont'd) 5. If using Total Connect, press the Total Connect icon to reset the camera for remote viewing and activate a Total Connect account. A pop-up window displays: “For remote camera viewing service, please contact your alarm company and ask for Total Connect service and provide the camera’s MAC ID XX:XX:XX:XX:XX:XX.

  • Page 20: Video Recording & Event Viewing

    Using Pictures, Cameras and Videos (Multimedia) (cont’d) Select Yes to reset the camera to factory default settings. Restart Camera: Press to restart the camera. Removing Cameras To delete a camera, highlight the camera name and press the DELETE icon. A confirmation window displays: Select “Yes”...

  • Page 21: Creating A Scene For Camera Recording

    Using Pictures, Cameras and Videos (Multimedia) (cont'd) Creating a Scene for Camera Recording To create a scene for camera recording, press the Automation , Scene Setup and Add Scene icons. In the Trigger section, press the Edit icon to define the event Trigger type; press Save when done.
  • Page 22 Using Pictures, Cameras and Videos (Multimedia) (cont’d)

  • Page 23: Using Z-Wave Devices And Scenes (Automation)

    Using Z-Wave Devices and Scenes (Automation) Using Z-Wave ® Devices Before a Z-Wave device will work in the home control network, it must be added (also called “included”) into the network. View the “Programming of Z-Wave Devices” training video and follow the instructions below to Include Z-Wave enabled devices into a home control network.
  • Page 24 Notes: • Honeywell is not responsible for property damages due to improper setting of the thermostat modes. If installing another brand of thermostat, follow the instructions in the User Guide for that •...

  • Page 25: Removing Z-Wave Devices

    • system. If needed refer to the control panel Installation Instructions on how to remove this user code. Honeywell is not responsible for property damages due to improper setting of the thermostat • modes. Light, switch, outlet module or door lock module 1.

  • Page 26: Z-Wave Factory Default

    Using Z-Wave Devices and Scenes (cont'd) Honeywell Thermostat 1. At the thermostat: a) Follow the instructions in the thermostat Installation Guide under “Installer setup” to “Remove a Z-Wave Network Connection.” b) When removal process is complete, press Done and the thermostat is removed.

  • Page 27: Z-Wave Device List

    Using Z-Wave Devices and Scenes (cont'd) Z-Wave Device List To access the list of Z-Wave devices that have been successfully enrolled into the Z-Wave network, and view their status, press the Automation . Use the OFF or ON buttons to control outputs. icon Creating Scenes The system can automatically activate devices when certain trigger events occur.
  • Page 28 Using Z-Wave Devices and Scenes (cont'd) Scene Options Set the TIME: In the Trigger/Condition box, press Add. Press the TIME button > Set the occurrence. If ONCE > Enter Date; if REPEATED > choose days of the week; if BY CLOCK > press on the “Hour/Minutes”...

  • Page 29: Room Setup

    Using Z-Wave Devices and Scenes (cont'd) Set Lights (on/off): In the Action box, press Add. Press the LIGHT button and select a Light Device from the drop-down menu; set the action to ON, OFF; or select ON FOR TIME and press on the “Hour/Minutes”...

  • Page 30: Updating Tuxedo With New Or Removed Devices

    Using Z-Wave Devices and Scenes (cont'd) 3. At Tuxedo #1: Press Add. At Tuxedo #2: Press Add. When device information from the Primary Tuxedo is downloaded to the Secondary Tuxedo: the Secondary Tuxedo displays, “Controller Add Success.” • the Primary Tuxedo displays, “Device Added Successfully.” •...

  • Page 31: Using The Security System

    Using the Security System Security System Operation You can arm your system in one of three arming modes: Away, Stay, and Night. The following table lists the three different arming modes and the results of each. Arming Mode FUNCTION Use when no one is staying on the premises. When armed in AWAY, the system AWAY sounds an alarm if a protected door or window is opened, or if any movement is detected inside the premises.
  • Page 32 Using the Security System (cont'd) 3. When the system is armed for Away and Maximum mode, you will hear steady beeps then rapid beeping during the last 10 seconds of Exit Delay. 4. For CP-01 installations, Maximum Mode cannot be used. How to Arm Multiple Partitions Note: Some systems may not have multiple partitions and the “Arm Multi-Partitions”...

  • Page 33: How To Bypass Zones

    Using the Security System (cont'd) How to Bypass Zones The Bypass function is used when you want to arm your system with one or more zones left open. Bypassed zones are unprotected and do not cause an alarm when violated while your system is armed. Some systems do not allow you to bypass fire, carbon monoxide or emergency zones.
  • Page 34 Using the Security System (cont'd) To disarm the system when entering the premises: Tuxedo automatically displays the Entry Delay Active screen when you enter the premises; enter your 4-digit user code. The partition is disarmed and the "Arming" screen is displayed showing the system as Ready to Arm.

  • Page 35: User Codes

    Using the Security System (cont'd) User Codes Each user must be assigned a name with a corresponding 4-digit user code in order to gain access to various features and functions. Tuxedo can hold the identity for 10 Users in its memory. If additional Users are needed, define the additional Users using the Console Emulation Mode.

  • Page 36: How To Add A User

    Using the Security System (cont'd) How to Add a User Your installer set up users at the time of installation. To add more users, do the following: Press the Setup , System setup , USER SETUP and ADD USER icons. Enter your Authorized Code.

  • Page 37: Fire And Carbon Monoxide Alarm Operation

    Using the Security System (cont'd) Fire and Carbon Monoxide Alarm Operation Your fire alarm system and carbon monoxide detector (if installed) is on 24 hours a day, providing continuous protection. In the event of an emergency, the installed smoke, heat, carbon monoxide detectors automatically send signals to your Control/Communicator, triggering a loud interrupted sound from the keypad.

  • Page 38: Output Setup Function

    Using the Security System (cont'd) Output Setup Function Tuxedo can activate/deactivate up to 18 pre-defined control panel output functions (if programmed in the control panel). The Output Setup screen displays Output selections. Control these output functions by enabling/disabling as follows: Press the Setup , System setup and Advanced Setup...

  • Page 39: How To Send Emergency Messages

    Using the Security System (cont'd) • Commercial systems with Alpha keypads have a feature where if you press a key for 5 seconds, you receive self help messages about the pressed key or holding the * key for 5 seconds to provide zone descriptors.
  • Page 40 Using the Security System (cont'd)

  • Page 41: Setup Menus

    Setup Menus Your installer has already set up your system, however, if changes are needed, you can change the settings as described below. Brightness and Volume Control From the "Home" screen, press the Setup icon. Move the Brightness/Volume slide bar up or down to increase or decrease settings.

  • Page 42: Weather Forecast

    Setup Menus (cont’d) Weather Forecast The *Weather forecast is displayed on the “Home” screen. To set the weather forecast for a specific location, press on the “Weather” feature. Select USA, Canada or Other. Select Zip Code/Postal Code or press Country/City. Weather conditions for that location are displayed.

  • Page 43: Routine Care

    Setup Menus (cont'd) Note: When the "Continue" icon is pressed the message "Touch Screen Disabled for =30 Seconds" is displayed. During these 30 seconds the touch screen should be wiped clean of fingerprints using a mild soap solution and a soft cloth. When the counter reaches zero, the window automatically closes and the touch screen is active.

  • Page 44: Power Mode Setup

    Setup Menus (cont’d) Setting Current Time and Date To set the current time, do the following: Press the Time/Date Setup icon and enter your Authorized Code. Press the Month "arrow," and select the current month. Press the displayed Year / Hour / Minutes and enter the current year/hour/minute(s).

  • Page 45: Remote Access

    Remote Access The Tuxedo keypad offers built-in web hosting capability to access your system via any web enabled device. The Tuxedo keypads IP Address is used on a standard web browser to control user functions. Supported Browsers include: iPhone Version iOS4, iPad Version iOS4 and iOS5, Galaxy –...

  • Page 46: Network Connections

    Remote Access (cont'd) Network Connections From the "Home" screen, press the Setup and IP Setup icons. LAN ON or WIFI ON and press Save Select a type of network connection Go to that section below for further information. Setup a LAN Connection Press the LAN ON button.

  • Page 47: Remote Access Log In Setup (Account Setup)

    Remote Access (cont'd) Remote Access Log In Setup (Account Setup) Remote access allows the user to access Tuxedo’s menus directly via the Internet when away from home. The home router must first be configured for port forwarding for both HTTP and HTTPS ports.. Refer to the router’s instructions for details on port forwarding.
  • Page 48 Remote Access (cont'd)

  • Page 49: Remote Services

    Remote Services Using Total Connect with Tuxedo (Remote Services) The Tuxedo supports Remote Services for controlling Z-Wave devices and scenes remotely from an associated Total Connect account. Ask your installer if a Total Connect account has been set up for you. The following table summarizes the relationships between Total Connect scenes and Tuxedo scenes: Scenes created in Total Connect Scenes created in Tuxedo...

  • Page 50: Creating Scenes In Total Connect

    Remote Services (cont'd) Creating Scenes in Total Connect Use the Automation section of the dashboard in Total Connect to create up to 20 scenes. Refer to the Total Connect Online Help Guide for further details and device limitations for creating an automation scene.

  • Page 51: Total Connect Server Screen For Troubleshooting

    Remote Services (cont'd) Total Connect Server Screen for Troubleshooting The “TC Server Info” screen displays the current server information and Z-Wave device status. This information is typically used for IP connection troubleshooting purposes in collaboration with a service technician. To access Total Connect Server Information and Z-Wave Status from the Tuxedo keypad, do the following: 1.
  • Page 52 Remote Services (cont'd) The screen displays: “Files downloaded successful…System will reboot in 15 seconds to reprogram the unit.” Or, select the Reboot button to start the update process quicker. (Pressing Abort. cancels the update.) When the update is complete, Tuxedo reboots and completes the software update. Note: After remote upgrade, delete the browsers temporary internet files (cache).

  • Page 53: Notes And Compatible Devices

    Notes and Compatible Devices Z-Wave Wireless Range This device complies with the Z-Wave® standard of open-air, line of sight transmission distances of 100 feet. Actual performance in a home depends on the number of walls between the controller and the destination device, the type of construction and the number of Z-Wave enabled devices installed in the control network.

  • Page 54: Supported Browser List

    Notes and Compatible Devices (cont'd) Supported Browser List Windows XP SP2 and SP3, IE 8.0 and above, Chrome 30 and above, Safari 5.0 & above, Mozilla Win7, Win8 Tablet 26 and above / default browser. Android Mobile/Tablet ICS4.0 and above / default browser iPad, iPhone Safari DISPLAY NOTE: For optimum viewing of the screens and menus, the tablet’s font size setting may...

  • Page 55: Supported Camera List

    For manual port forwarding, the recommended internal port configuration is 80 for HTTP and 443 for HTTPS. • Refer to the above camera list for supported Honeywell cameras for remote viewing. • Cameras can be enabled or disabled from the Tuxedo Camera Setup screen for remote viewing.

  • Page 56: Z-Wave Compatible Devices

    Yale Real Living Touchscreen Deadbolt Lock Schalge Link Deadbolt Lock Schlage Link Lever Lock Kwikset Smartcode Lever lock Kwikset Smartcode Deadbolt Lock Thermostats Honeywell ECC Wayne Dalton Zwave thermostat Trane Zwave Thermostat Appliance HomeManageable Appliance Module Wayne Dalton Small Appliance Module...

  • Page 57: System Troubles

    Notes and Compatible Devices (cont'd) System Troubles The “Security” screen also displays an Icon(s) if a system trouble(s) occurs. If a Trouble Icon is shown, contact your alarm company. The following Icons may be shown as applicable to your system: ICON FUNCTION AC Loss –...
  • Page 58 Notes and Compatible Devices (cont'd)
  • Page 59 Notes and Compatible Devices (cont'd)
  • Page 63 FEDERAL COMMUNICATIONS COMMISSION STATEMENTS The user shall not make any changes or modifications to the equipment unless authorized by the Installation Instructions or User's Manual. Unauthorized changes or modifications could void the user's authority to operate the equipment. FCC CLASS B STATEMENT This equipment has been tested to FCC requirements and has been found acceptable for use.
  • Page 64 TWO YEAR LIMITED WARRANTY Honeywell International Inc., acting through its Security & Communications business (“Seller”), 2 Corporate Center Drive, Melville, New York 11747 warrants its products to be free from defects in materials and workmanship under normal use and service, normal wear and tear excepted, for 24 months from the manufacture date code;...

Table of Contents