Specifications; Front Panel Leds - Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Supplementary external power supply must be Listed to CAN/ULC-S318 for cUL Burglary
Installations and ULC-S527 for cUL Residential Fire Installations.

Specifications

Mechanical Specifications:
Width: 8.23 inches (209.04mm)
Height: 5.59 inches (141.99mm)
Depth:1.13 inches (28.70mm)
Electrical Specifications:
Backlight OFF, Sound OFF, WIFI ON
Backlight ON, Sound OFF, WIFI ON
Backlight ON, Sound ON, WIFI ON
Operating Environment:
Humidity
Temperature:
Operating
Shipping / Storage

Front Panel LEDs

The Tuxedo Touch Keypad has three LEDs as follows:
NOTE: If the Screen Blackout (*EN50131 Display) feature is enabled (see below) the keypad returns to
the "Home" screen and the "Armed" and "Ready" status LEDs turn OFF after 30 seconds. The keypad
will remain in this state until a valid user code is entered.
*The EN50131 Display compliance feature is a European Standard designed to prevent unauthorized
users from viewing the status of the Security System.
About the System (cont'd)
9.6VDC
170mA
280mA
340mA
93% RH, non- condensing
14˚ F to 131˚ F / -10˚ C to 55˚ C
(UL tested 32˚-120˚F / 0 to 49˚C)
-40˚ F to 158˚ F / -40˚C to 70˚C
9
12VDC 13.8VDC
140mA 130mA
225mA 200mA
260mA 250mA
SD/SDHC CARD Slot
ARMED (RED) LED
ON – System is armed.
OFF – System is not armed.
READY (GREEN) LED
ON – System is disarmed and ready to arm.
OFF – System is armed or disarmed but not
ready. If disarmed, faults or troubles are present.
MESSAGE (YELLOW) LED
FLASHING – The system contains new
message(s) for the User.
OFF – No new messages.
RESET BUTTON
Press to reset keypad
6280-001-V0