Setup; Brightness And Volume Control; Display & Audio Setup; Language Selection (If Applicable) - Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Home automation system
Hide thumbs Also See for Tuxedo Touch WIFI:
Table of Contents

Advertisement

You may access Brightness and Volume, Display & Audio Setup, System Setup and IP Setup
from the "Setup" screen.

Brightness and Volume Control

From the "Home" screen, access the "Setup" screen as follows:
ICON
1. From the Home screen, press the Setup icon.
2. Move the Brightness/Volume slide bar up or
down to increase or decrease settings.
Yes saves the change. No discards the change.
Display & Audio Setup
From the Display & Audio Setup feature y
Backlight Off After Time, To Homepage After Time, Auto Slideshow After Time, and
Clean Screen.
Operating modes provides access to Chime Mode, Voice Mode, and Voice Chime.
• Chime Mode – Keypad chimes whenever a door or window is open.
• Voice Mode – Keypad voice annunciates whenever a change in system status occurs such as Armed,
Disarmed, or Alarms.
• Voice Chime – The chime mode and voice mode are in effect. The chime beeps followed by voice
annunciation.
From the Home screen, press the "Setup" icon, and do the following:
ICON
1. Press the Disp & Audio Setup icon.
2. Enter your Authorized Code, if required.
3. Select Chime Mode or Voice Mode to turn
the mode on or off.
4. Press the HOME or BACK icon after
making your selection.

Language Selection (if applicable)

The Tuxedo Touch has the functionality to display four different languages including multi-lingual web
page display. Set the language feature as follows:
ICON
ACTION
1. From the Home screen, press the Setup
icon.
2. Press the Disp & Audio Setup icon.
3. Enter an Authorized Code.
4. Press the Language field, and select a
language.

Setup

ACTION
ou may access Operating Modes, Language,
ACTION
16
NOTES
If changes are made, when you exit a pop-up
window displays: "Information
Settings saved"
NOTES
If the Chime Mode and Voice Mode are both
selected, the Voice Chime is automatically selected.
When the keypad exits the "Operating Modes"
screen, your selection is saved.
It may take a few seconds for the Chime Mode to
take effect.
NOTES
If applicable, after the language is selected, the
keypad will revert back to the "Home" screen with the
selected language applied.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

TuxwifisTuxwifiw

Table of Contents