Account Setup - Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Setup a WLAN (Wi-Fi) Connection
From the IP Setup screen, add a WLAN network connection as follows:
ICON
1. At the Tuxedo Touch keypad:
a) Press the WIFI ON button.
- Use the scroll bar to locate a network
from the list of Wi-Fi Networks to
connect to and highlight that field.
- Or, scroll to the bottom of the list and
select Add Network. Highlight each field
to enter the required information for
SSID, Security Mode,
Passphrase/Shared Key, and Port # on
the "Data Entry Keyboard" and press
GO.
2. Press the Save icon. Pressing Save when
changing the port number resets the
keypad.
3. At your PC, Smart Phone or Tablet
browser, start your browser and enter
your IP Address.
•
If left inactive, Web connections disconnect
after 10 minutes.

Account Setup

Account setup provides a browser log-on page (for higher security) when viewing from a web enabled
device or PC on a different sub-net. To set up a user account, do the following:
ICON
1. Press the Account Setup button.
2. If required, highlight the User
Name/Password fields on the screen and
enter the data for each on the "Data
Entry Keyboard"; press GO.
3. Press the Save icon. The new user is
displayed on the screen.
4. Press the Clear button to clear the User
information.
Initial Setup (cont'd)
ACTION
ACTION
15
NOTES
A pop-up window displays:
"This will switch off LAN Network, do you want
to continue?" Yes or No.
Use the Data Entry Keyboard to enter the required
information.
• Press the "up arrow" key to switch to capital
letters.
• Press the Space key to add a space between
characters.
• Press the x key to delete/backspace.
• Press the ABC/.?123 key to switch between
numerals and symbols/characters.
• Press GO to return to the IP Setup screen.
A pop-up window displays:
"Network Details Saved"
A pop-up window displays the message:
"Settings saved."
Select OK to save.
Note: To change the default port number (6280),
press the field next to port number and on the data
entry keyboard enter a secondary port number
between 5000-65534. Press GO and then press
Save.
A pop-up window displays: "Success Network
Details Saved Port number changed."
"Keypad is going to reset"
The keypad will reboot with the newly configured
port number.
NOTES
Note: Account Setup allows you to add up to 5
users.
Note: A password is required if logging in from a
remote location (not using the premises network).
A Confirmation window displays the message:
Settings saved.
The ENABLED button is displayed when a
successful network connection is completed.