Video (Audio) Setup - Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Video (Audio) Setup

View the "SD Card Video Playback" training video and then access the Video (Audio) feature, by doing
the following:
ICON
1. Insert your personal media
(SD/SDHC) card (with stored video
files).
2. Press Multi-Media and then press the
Video icon.
3. Highlight a video file from the list and
press Play to start the selected video
file.
4. Press the Repeat icon to continually
replay the selected video.
5. Deselect the Repeat icon to
automatically play the complete list of
video files starting with the first video
and ending with the last.
Video Icons
Play
Pause
Multi-Media (cont'd)
ACTION
Stop
Full View
A Video Converter is required to convert videos for
proper playback on the Tuxedo Touch Keypad. Use an
Internet search engine to locate and download a Video
Converter, then follow the steps in the Video Converter
Instructions (provided in the carton).
Notes:
• Supported video playback formats include MPEG4
and H.264, containers AVI, MOV, MP4.
• Maximum video resolution should not exceed 400 x
240.
• If the video file causes the keypad to lock, use a
small object (such as a paper clip) to press the reset
button located in the lower right-hand side of the
keypad to reset the keypad.
• Videos can not be played when the EN50131
Display is turned ON.
• To exit Full View mode at any time while a video is
playing, press anywhere on the screen.
• When in Full View mode there is an 8-10 second
delay for video display.
Use the slide bar to scroll through the video list.
Press the appropriate icon to Play, Pause, view a
Repeat Full View, Stop or Repeat the video.
21
NOTES