Paper Receiving Tray Unit - Riso CZ180 Series Technical Manual

CHAPTER 7: PAPER EJECTION SECTION

10. Paper receiving tray unit

REMOVAL
) Turn OFF the machine power, and remove following parts.
Front cover (M3x8 screws; 6 pcs)
Rear cover (M3x8 screws; 5 pcs)
Paper ejection cover (M3x6 screws; 2 pcs)
Suction unit (M3x6 screws; 2 pcs)
2) Remove mounting screws from Paper receiving tray lock plates (front & rear) and detach these
lock plates. (M3x6 screws; 4 pcs)
3) Slide the Paper receiving tray out from the machine.
Precaution in Assembly
) Match the positioning holes and pins when mounting the Paper receiving tray lock plates (front &
rear).
Mounting screw
Paper receiving tray lock plate; front
RISO Inc. Technical Services & Support
Mounting screw
Paper receiving tray lock plate; front
7 - 2 CZ80 / CV860 Rev. .0
US.RISO.COM