Installation; Inkless Drum (Cz180) - Riso CZ180 Series Technical Manual

Inkless Drum (CZ180)

Installation Procedure for The CZ Series
Types of Applicable Printers
The following printer models are the intended basic
units for installing the CZ series inkless Print cylinder
(drum).
RISO KAGAKU CORPORATION Models
RISO CZ series
Nobody but Riso-authorized service
representatives is allowed to install this unit.
1. Print Cylinder (Drum) Preparation
Important: When installing a black ink cartridge, this procedure is not necessary.
1) Remove the Print cylinder (drum) cover, the Bottle SW cover, and the Bottle guide.
Note: Disconnect the connecter of the Bottle Set SW wireharness from the Bottle guide.
2) Depending on the ink color, cut off the corresponding Jumper wireharness referring to
the table below.
Important: Be sure to cut off the Jumper wireharness from the joint and remove
3) Fix the Bottle guide, the Bottle SW cover, and the Print cylinder (drum) cover.
Important: Be sure to connect the connecter of the Bottle Set SW wireharness
2. Insert an Ink cartridge
1) Set an ink cartridge to the Print cylinder (drum).
Be sure to lead ink to the nozzle of the cartridge in advance.
Important: Be sure that the Print Cylinder (drum) temperature is above 59 °F (10 °C).
2) Install the Print cylinder (drum) in the printer.
3) Start the test mode.
Note: If the error code No. d04-534 appears on the control panel, remove the Print
cylinder (drum) and then check the ink cartridge and the Jumper wireharness.
4) Input the test item code No.887 and press the start key .
3. Operation Check
1) Make a master with Riso test chart No.15 and print 200 copies at speed 2.
2) Check density balance.
4. Labeling
Affix an ink color indication label on the Print cylinder (drum) cover as illustrated.
CZ180 / CV1860 Rev. 1.0
RISO Inc. Technical Services & Support
Inkless Print Cylinder (Drum)
Please skip to the procedure 2.
completely.
to the Bottle guide.
Packing List
This package contains the following items.
1. Print cylinder (drum) ................................... 1 unit
2. Ink color indication label ...................... 1 sheet
3. Installation guide (This manual) ................ 1 copy
Ink color indication label
1 - 13
CHAPTER 1: MAINTENANCE
Bottle SW cover
Bottle guide
Print cylinder (drum) cover
Connecter of the Bottle Set
SW wireharness
Jumper wireharness
/ RED
042-36201-002
US.RISO.COM