Sector Gear - Riso CZ180 Series Technical Manual

CHAPTER 5: SECOND PAPER FEED

6. Sector Gear

REMOVAL
) Turn OFF the machine power and remove Rear cover. (M3x8 screws; 5 pcs)
2) Open the PCB bracket on the rear of the machine. (M3x8 screws; 4 pcs)
3) Remove following parts
Timing cam (6mm dia. E-ring;  pc)
Vertical print positioning base unit
4) Remove the Sector gear spring and detach the Sector gear by removing E-ring. (6mm dia. E-ring;
 pc)
Adjustment after Assembly
) Mounting position adjusting of Timing cam
RISO Inc. Technical Services & Support
5 - 8
Timing cam
Sector gear
CZ80 / CV860 Rev. .0
US.RISO.COM