Riso CZ180 Series Technical Manual page 128

6. Compression Motor
Precaution in Removal
1) Watch out for the Compression plate, which hangs free when the Gear to the Compression motor
is removed.
REMOVAL
1) Turn OFF the machine power and remove the Master removal upper cover. (M3x8 screws; 2 pcs)
2) Remove the Gear cover (rear). (M3x6 screws; 2 pcs)
3) Remove the gear.
4) Unplug the wire harness connector of Compression motor, and remove the motor. (M3x5 screws;
2 pcs)
Precaution in Assembly
1) When mounting the Gear back on the unit, make sure that the Master compression plate is
positioned level against the Master removal housing.
Compression motor
Compression motor
CZ180 / CV1860 Rev. 1.0
RISO Inc. Technical Services & Support
CHAPTER 10: MASTER REMOVAL
View of the Master compression
plate hanging down.
10 - 11
Mounting screw
Mounting screw
US.RISO.COM