5. Drum Set Sensor
REMOVAL
) Remove the Inking motor. (Ref: Previous page)
2) Remove the Drum lock spring from the Drum hook right.
3) Remove the Drum hook right. (6mm dia. E-ring; 1 pcs)
4) Carefully, release the hooks on the Drum set sensor and remove the sensor.
Precaution in Assembly
1) In mounting back the Inking motor, use a wire harness band of about 100mm in length and fix
the RF-wire harness firmly on the Holder bracket. This is to prevent the wire harness from being
pinched or cut when mounting the Ink bottle guide. (Ref: Inking motor removal)
CZ80 / CV860 Rev. .0
RISO Inc. Technical Services & Support
Inking motor
Grip handle
Wire harness band
8 - 7
CHAPTER 8: PRINT DRUM
Drum set sensor
Drum lock spring
Drum hook (right)
Inking motor
US.RISO.COM