Warning Errors (Exx : Serviceman Call Errors); Warning Errors (Fxx : Others) - Riso CZ180 Series Technical Manual

CHAPTER 13: PANEL MESSAGE

6) Warning Errors (Exx : Serviceman Call Errors)

Error Type E02 [Maintenance call]
E02-xxx
Description !!Maintenance!!
Call Service
To reset
Press Reset Key, and also reset the maintenance call value setting by test mode.
display
Error Point
Master counter reached the value set for the maintenance call (value set by test mode). [The
011 message appears when either the power is turned ON, the unit is reset, or when the machine
operation ended.]
Copy counter reached the value set for the maintenance call (value by set test mode). [The
012 message appears when either the power is turned ON, the unit is reset, or when the machine
operation ended.]

7) Warning Errors (Fxx : Others)

Error Type F01 [No master on print cylinder (drum)]
F01-xxx
Description No Master on Print Cylinder (Drum)
Make a New Master
To reset dis-
Make a new master with an original.
play
Error Point
015 There is no master on the print drum at the start of printing.
Error Type F05 [Print quantiy under Minimum Print Quantity]
F05-xxx
Description
Enter Print Quantity Over The Programmed Minimum Value
To reset
Enter print quantity value over the programmed minimum value.
display
Error Point
019 In master making, the print quantity selected is less than the minimum print quantity.
Error Type F21 [Next Original not set on AF for Multi-Up]
Description F21-xxx
To reset dis-
Set original on the AF.
Or press STOP key (time-out exists for pressing the STOP key).
play
Error Point
032 Next original is not set on AF when multi-up is selected.
RISO Inc. Technical Services & Support
Error Conditions
Error Conditions
Error Conditions
Error Conditions
13 - 22 CZ180 / CV1860 Rev. 1.0
US.RISO.COM