Specification; Troubleshooting - XYZ Printing Nobel 1.0 Product Manual

Post-Process Your Prints
Remove Support Structure
Use pliers or other tools to remove the support structure
from the cleaned prints to ensure perfect finish.

Specification

Nobel 1.0 3D Printer
Print Technology Stereolithography (SL)
UV Light Source UV Laser λ 405nm (100mW)
Maximum Printing 128 x 128 x 200mm
Area 5"x 5"x 7.8"
X/Y Axis Resolution 0.3mm
Z Axis Resolution 0.025/0.05/0.1 mm
File Format .stl & .3wn (sliced with XYZware_Nobel)
Operating Conditions Temperature: 18-28℃/64.4-82.4℉
Humidity: 40-80% RH (no condensation)

Troubleshooting

When an error occurs, please refer to the service code on the printer and/or in the software, and check the suggestion below for
troubleshooting.
If any error persists, please contact customer service center for support.
● Error Code 1000: Vibration generator movement abnormalities or tank sensormalfunctioned
Suggestion:
Contact customer service center directly.
Empty Uncured Resin Inside the Prints
Hollow prints with uncured resin inside may break as time
passes. To ensure the durability of hollow prints, leave a
weep hole at the bottom of your 3D design, so you can
empty the uncured resin easily.
Connectivity
AC Input
Printer Dimension
Net Weight
Print Material
OS Support
-12-
USB Wire & USB drive
100-240V 50/60Hz 60W
280 x 337 x 590 mm
11"x 13.2"x 23.2"
9.6 KG
Photopolymer Resin
Windows 7/8 and above
Mac OSX 10.8 and above
V1.5