XYZ Printing Nobel 1.0 Product Manual page 10

Check Before Every Print
Check the following items before printing to ensure printing quality and the operation of the printer.
① Remove any residue or dust from the platform and tank with the scraper, filter or other tools.
② Mop the fingerprint or resin under the tank or on the glass with with lint-free cloth dampened with alcohol.
③ Brush the level sensor with alcohol if it gets stuck.
Level sensor should return to the original position after a soft push. When the tank is full or the resin gets sticky, the sensor's
movement may be hindered greatly. It may take 1 minute for sensor to return to normal speed. If stuck, remove the remaining
resin from tank before cleaning. If resin in tank is cured, please replace the tank.
-10-
V1.5