Furuno FCV-1200L Installation Manual page 59

8. Press [ ] to select NAV DATA, and then press [+] to open the dialog box.
LC LA DECCA GPS DR
9. Use [-] or [+] to select type of navigator connected, and then press [ ] or [ ] to close the
dialog box. AUTO (default setting) selects a navigator in the order of GPS, Loran C, Loran A,
Decca, DR (Dead Reckoning).
10. Press [ ] to select COURSE, and then press [+] to open the dialog box.
TRUE MAG
11. Use [-] or [+] to select TRUE or MAG (magnetic bearing) as appropriate, and then press [ ]
or [ ] to close the dialog box. TRUE is the default setting. If no navigator is connected, turn
the [FUNCTION] switch to other position to quit.
12. Press [ ] to select TLL (Target Latitude, Longitude) OUTPUT, and then press [+] to open the
dialog box.
OFF ON
13. TLL OUTPUT enables or disables output of position data from the video sounder to external
equipment, at the moment the [MARKER TLL] key is pressed. Use [+] or [-] to select ON or
OFF (default setting) as appropriate, and then press [ ] or [ ] to close the dialog box.
14. Turn the [FUNCTION] switch to EXIT position to quit.
AUTO
3-17