Furuno FCV-1200L Installation Manual page 57

9. Press [ ] to select SONDE GRAPH, and then press [+] to open the dialog box.
OFF ON
10. Use [-] or [+] to turn the graph display OFF (default setting) or ON as appropriate, and then
press [ ] or [ ] to close the dialog box.
11. Press [ ] to select GRAPH MODE, and then press [+] to open the dialog box.
SURFACE BOTTOM
12. Use [-] or [+] to select what temperature to use for the graph, and then press the [ ] or [ ] to
close the dialog box.
SURFACE: First-written water temperature (surface condition, default setting)
BOTTOM: Last-written water temperature (net sonde position)
13. Press [ ] to select GRAPH WIDTH, and then press [+] to open the dialog box.
1/4 1/2
14. Use [+] or [-] to set width of the sonde graph as desired, and then press [ ] or [ ] to close
the dialog box.
1/4: 1/4 of screen width (default setting)
1/2: 1/2 of screen width
15. Turn the [FUNCTION] switch to EXIT position to quit.
3-15