Furuno FCV-1200L Installation Manual page 24

For portrait-type unibody monitor unit
a) Pass the signal cable (connects between interface unit and display unit) through the slot in
the hanger and then connect the cable to the display unit.
b) Fasten the hanger at the rear of the display unit with four binding screws (M4X10).
For landscape-type unibody monitor unit
a) Attach the hanger at the rear of the display unit with four binding screws (M4X10).
1-2
Signal Cable
Figure 1-2 Hanger
1 2
3
4
Figure 1-3 Hanger, rear view
1 2
3
4
Figure 1-4 Hanger, rear view
HANGER
Slot
Hanger (rear view)
2
1
4
3
Hanger (rear view)
1 2
3
4