Furuno FCV-1200L Installation Manual page 27

Figure 1-9 How to flush mount unibody type monitor unit
3. Fasten the monitor unit to the mounting location with six tapping screws.
Separate monitor unit flush mount kit
Separate monitor unit flush mount kit: Type OP06-17, Code no. 006-556-310
Name
Mounting Fixture
Tapping Screws
Hex-head Screws
1. Make cutout in mounting location referring to page D-8A/D-8B.
2. Fasten mounting fixture to monitor unit four hex-head screws.
3. Fasten monitor unit with mounting fixture to mounting location with four tapping screws.
Hex-head screws
Mounting fixture
Type Code No.
06-021-1321 100-279-622
5X20 000-802-840
M4X12 000-882-040
Hex-head screws
Mounting fixture
Figure 1-10 How to flush mount the control unit
Mounting fixture
location changes
with monitor
orientation.
Qty Remarks
1
4
4
Mounting fixture location
changes with monitor unit
orientation.
1-5