Fuji Xerox DocuPrint CP225 w User Manual page 63

• For Windows 8, Windows 8 64-bit Edition, Windows 8.1, Windows 8.1 64-bit
Edition, Windows Server 2012, and Windows Server 2012 R2
1
On the Desktop screen, place the mouse pointer in the upper right corner of the screen and move the mouse
down, and then select Settings.
2
Click Control Panel  Network and Internet  View network computers and devices.
3
Locate the host name of the server computer, and then double-click the host name.
4
Right-click the shared printer name, and then click Connect.
5
Click Install driver.
6
Wait until the driver is copied from the server to the client computer.
A new printer object is added to the Devices and Printers folder. The duration of this procedure may vary
based on the network traffic.
7
Print a test page to verify installation.
On the Desktop screen, place the mouse pointer in the upper right corner of the screen and move the
a
mouse down, and then select Settings.
Click Control Panel  Hardware and Sound (Hardware for Windows Server 2012 and Windows Server
b
2012 R2)  Devices and Printers.
Right-click the printer you just created and select Printer properties.
c
On the General tab, click Print Test Page.
d
When a test page is printed successfully, the installation is complete.
Peer-to-Peer
Peer-to-peer is a technology that allows you to connect to a printer connected to a host computer. You are required
to download and install the print driver during the connection setup.
• For Windows Server 2003, Windows Server 2003 x64 Edition, Windows Server
2003 R2, and Windows Server 2003 R2 x64 Edition
1
Click Start  Printers and Faxes.
2
Double-click the Add Printer icon to launch the Add Printer Wizard.
3
Click Next.
4
Select A network printer, or a printer attached to another computer, and then click Next.
5
Click Browse for a printer, and then click Next.
Printer Connection and Software Installation 63