Fuji Xerox DocuPrint CP225 w User Manual page 15

Items
Supported Protocol
Power Supply
Operating Noise
Power Consumption
Dimensions
Weight
Usage Environment
TCP/IP (IPv4/IPv6, LPD, IPP, IPPS, Port9100, WSD, HTTP, HTTPS, RARP,
AutoIP), SNMP, DHCP, DHCPv6, BOOTP, Bonjour (mDNS), AirPrint, Google
Cloud Print
NOTE:
• WSD stands for Web Services on Devices.
AC 100 – 127 V ± 10%; 7 A; both 50/60 Hz ± 3 Hz
AC 220 – 240 V ± 10%; 5 A; both 50/60 Hz ± 3 Hz
IMPORTANT:
• Power outlets that provide the above power level are recommended.
During operation:
Color: 6.4 B; 49.1 dB (A)
Monochrome: 6.4 B; 48.2 dB (A)
During stand-by: 3.5 B; 19.6 dB (A)
IMPORTANT:
• Measurements based on ISO7779
Unit B: acoustic power level (LwAd)
Unit dB (A): radiated sound pressure (bystander position)
Maximum: 605 W, During sleep mode of power saver mode: 1.6 W or less
Average:
During standby: 38 W
During continuous color printing: 281 W
During continuous monochrome printing: 320 W
IMPORTANT:
• Low power mode of power saver mode: 10 W average
(The printer does not use electricity when the power is switched off even with
the power cord is plugged in.)
397 (W) 398 (D)  246 (H) mm
Approximately 12.3 kg (including toner cartridges)
During Use: Temperature: 10 – 32°C; Humidity: 10 – 85% (except malfunctions
due to dew condensation)
Non-Use: Temperature: -20 – 40°C; Humidity: 5 – 85% (except malfunctions due
to dew condensation)
IMPORTANT:
• Until the conditions (temperature and humidity) inside the printer become
acclimated to the installation environment, certain conditions of paper can
cause poor printing quality.
Description
Specifications 15