Setting Up For Shared Printing - Fuji Xerox DocuPrint CP225 w User Manual

5
If prompted, install the print driver on your computer. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.
6
Complete the additional steps in the wizard, and then click Finish.
7
Print a test page to verify printer installation.
Open the Devices and Printers or Printers folder by performing step 1.
a
Right-click the printer you just created, and then click Printer properties (Properties for Windows Vista
b
and Windows Server 2008).
On the General tab, click Print Test Page. When a test page is printed successfully, the installation is
c
complete.
 Setting Up for Shared Printing
You can share your new printer on the network using the Software Pack CD-ROM that shipped with your printer, or
using Windows Point and Print or peer-to-peer method.
This section describes Point and Print and peer-to-peer methods. Configure the printer sharing settings on the
server computer, and then install its driver on all the client computers that use the shared printer by Point and Print
or peer-to-peer method. Using either of the methods, however, you will not be able to use features such as the
SimpleMonitor and other printer utilities, which will be installed from the Software Pack CD-ROM.
NOTE:
• You need to purchase an Ethernet cable separately for shared printing.
Configuring the Sharing Settings of Your Printer
• For Windows Server 2003, Windows Server 2003 x64 Edition, Windows Server
2003 R2, and Windows Server 2003 R2 x64 Edition
1
Click Start  Printers and Faxes.
2
Right-click this printer icon and select Properties.
3
From the Sharing tab, select the Share this printer check box, and then enter a name in the Share name text
box.
4
Click Additional Drivers and select the operating systems of all network clients using this printer.
5
Click OK.
If the files are not present in your computer, insert the server operating system CD.
6
Click Apply, and then click OK.
• For Windows Vista and Windows Vista 64-bit Edition
1
Click Start  Control Panel  Hardware and Sound
2
Right-click the printer icon and select Sharing.
3
Click Change sharing options.
The "Windows needs your permission to continue" appears.
4
Click Continue.
5
Select the Share this printer check box, and then enter a name in the Share name text box.
6
Select Additional Drivers and select the operating systems of all network clients using this printer.
7
Click OK.
8
Click Apply, and then click OK.
58 Printer Connection and Software Installation
 Printers.