Removing The Chassis Cover - DFI KS310-IMX6 User Manual

Removing the Chassis Cover

Note:
The system unit used in the following illustrations may not resemble the actual one.
These illustrations are for reference only.
1. Make sure the system and all other peripheral devices connected to it has been powered-
off.
2. Disconnect all power cords and cables.
3. The 11 mounting screws on the rear side of the system are used to secure the cover to the
chassis and the 2 mounting screws are used to fix the COM port. Remove these screws and
then put them in a safe place for later use.
Mounting Screw
4. After removing the mounting screws, lift the cover up.
Lift the Cover Upward
Chapter 2 Installing the Devices
Chapter 2
Mounting Screw
Mounting Screw (COM port)
11
5. The Mini PCIe slots and SIM card slot are readily accessible after removing the chassis
cover.
SIM card Slot
Mini PCIe Slot
www.dfi .com