Pin Assignments And Description; Connector And Led Location; Combo Interface Connector, Jp1, Pins And Signal Descriptions 21 Figure 5.1 Board Mounted Header; Touch Screen Connector, Jp2, Pins And Signal Descriptions - Advantech IDK-1110WR-50WSA1 User Manual

 95% at 60°C, RH Non-condensing
Acquired RoHS certificate
Regulatory FCC-B, CE approvals
Dimension: 75 mm x 20 mm x 10 mm
5.4

Pin Assignments and Description

5.4.1

Connector and LED Location

JP2 Connector
(4-wire Touch
screen interface)
5.4.2 Combo Interface
Descriptions
The combo interface connector, USB and RS-232, is a box 2.0mm 10-pins 90
degree, Male type with lock connector, intended to be used with single wired pins in
5+5 pins header. The pins are numbered as shown in the table below.
USB Signal
Pin# Name
1 G
2 V
3 G
4 D+
5 D-
5.4.3

Touch Screen Connector, JP2, Pins and Signal Descriptions

The Touch Screen connector, JP2, is a FFC/FPC SMD 1.0mm 4-pins 90 degree,
Female type connector. The pins are numbered as shown in the table below.
LED
Connector,
Signal Function
Ground
USB Power
Ground
USB D+
USB D-
Figure 5.1 Board Mounted Header
JP1, Pins
RS-232 Signal
Pin# Name
1 G
2 V
3 G
4 TxD
5 RxD
21 IDK-1110WR User Manual
JP1 Connector
(USB&RS-232
Combo Interface)
and Signal
Signal Function
Ground
Power
Ground
Serial Port
Serial Port