Combo Interface Connector, Jp1, Pins And Signal Descriptions 29 Figure 6.1 Board Mounted Header; Touch Screen Connector, Jp2, Pins And Signal Descriptions - Advantech IDK-1110R-series User Manual

6.4.3

Touch Screen Connector, JP2, Pins and Signal Descriptions

The Touch Screen connector, JP2, is a FFC/FPC SMD 1.0mm 4-pins 90 degree,
Female type connector. The pins are numbered as shown in the table below.
TS4 Pin # Signal Name
1 YB
2 XL
3 YT
4 XR
4-Wire Touch Screen ZIF connector
IDK-1110R User Manual
Figure 6.1 Board mounted header
Signal Description
Bottom
Left
Top
Right
4-Wire Screen viewed from coversheet side
30