Throttle Lever; 2Wd/4Wd Selector - Can-Am Outlander 500 2008 Operator's Manual

While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.
NOTE: This section gives basic func-
tions of the various controls of your ve-
hicle. For more details of how to op-
erate one control in conjunction with
some others, refer to OPERATING IN-
STRUCTIONS further in this section.

1) Throttle Lever

When pushed, it increases the engine
speed that allows the engagement of
the transmission on the selected gear.
When released, the engine speed
should return automatically to idle and
the vehicle will gradually slow down.
TYPICAL
1. Throttle lever
2. To accelerate
3. To decelerate

2) 2WD/4WD Selector

This selector allow to choose be-
tween 2WD or 4WD when the vehicle
is stopped.
WARNING
TYPICAL
1. Selector
2. 2WD position
3. 4WD position
CAUTION: The vehicle must be
stopped to engage or disengage
2WD/4WD
damage may occur if selector is en-
gaged or disengaged while driving.
CAUTION: If the rear wheels are
spinning, release the throttle and
wait engine return to the idle before
selecting the 4WD mode.
The 4WD mode is engaged when the
selector is pushed downwards.
_____________________
selector. Mechanical
65