Can-Am Outlander 500 2008 Operator's Manual page 71

NOTE: While engine can be stopped
by turning ignition key to OFF posi-
tion, we recommend the engine be
stopped by the engine stop switch.
TYPICAL
1. Engine stop switch
Engine Start Button
To start engine, place the engine stop
switch to RUN.
Press and hold the engine start button.
Release immediately after engine is
started.
TYPICAL
1. Engine start button
2. Engine stop switch
NOTE: The engine will not turn over if
the engine stop switch and/or ignition
switch are turned to the OFF position.
Override Button
This button is used to override the re-
verse speed limiter system while pow-
er backing up. Press and hold the
override button then depress throttle
lever gradually.
Never activate the override but-
ton if throttle lever is already de-
pressed as a loss of control may
result, causing severe personal in-
jury or death.
TYPICAL
1. Override button
2. Engine stop switch
_____________________
WARNING
69