Can-Am Outlander 500 2008 Operator's Manual page 75

Display Selector Button
Button used to navigate between
modes or to reset data depending on
the feature selected.
vmo2008-001-020_i
1. Selector button
Tachometer
Measures engine revolutions per
minute (RPM). Multiply by 1000 to
obtain the actual revolutions.
NOTE: RPM can also be displayed
via Display 2 (mode) display. Refer to
DISPLAY 2 (MODE).
vmo2008-001-020_J
1. Tachometer
2. Operating range
3. Tachometer via display 2 (mode)
Transmission Position Display
This display will show transmission
position.
vmo2008-001-020_d
1. Transmission position
DISPLAY
P
R
N
H
L
NOTE: If the letter "E" is displayed
in the transmission position display, it
means that there is a electrical com-
munication error. Contact an autho-
rized Can-Am dealer.
Fuel Level Display
Bar gauge that continuously indicates
the amount of fuel left in the fuel tank.
Also, an indicator lamp will indicate a
low-fuel condition as only one bar is
displayed.
_____________________
FUNCTION
Park
Reverse
Neutral
High Gear
Low Gear
73