When the unit is installed directly on carpeting, tile, or other combustible materials other than wood flooring,
it must be installed on a metal or wood panel extending the full width and depth of the unit.
Figure 2B
VENTING GUIDELINES
THIS FIREPLACE IS APPROVED FOR USE WITH ONE OF THE FOLLOWING DIRECT VENT
CHIMNEY SYSTEMS FOR HORIZONTAL & VERTICAL TERMINATIONS:
T SIMPSON DURA-VENT DV-GS CHIMNEY SYSTEM 4" X 6 5/8"
T AMERI-VENT DIRECT VENT CHIMNEY SYSTEM 4" X 6 5/8"
IMPORTANT: This fireplace is manufactured with the appropriate adaptor for proper connection of
either of these systems.
Contact your dealer for the appropriate vent kit and components part numbers for the chimney system
required for your specific venting application.
Refer to the chimney manufacturer's installation manual for complete installation instructions.
Installation must conform with the venting requirements & restrictions as outlined in this manual.
IMPORTANT: Consult the local and national installation codes to assure that adequate combustion and
ventilation air is available.
NOTE:
Page 3