Steps For Starting A Workstation; Steps For Starting A Server - DEC 3000 800 Owner's Manual

Turning On the System
Workstation To start up the DEC 3000 Model 800/900 AXP workstation
Startup system, perform the steps in Table 6–1.
Procedure
Table 6–1 Steps for Starting a Workstation
Step
1
2
3
To start up the DEC 3000 Model 800S AXP server system,
Server Startup
Procedure perform the steps in Table 6–2.
Table 6–2 Steps for Starting a Server
Step
1
2
3
The power indicator light
lights if the system has started up successfully. If the power
light does not come on, or the fan failure light
Chapter 13.
6–4 Starting Up the System
Description
Turn the monitor power switch to the On position ( | ).
Turn on the power switch to any other devices, such as
a BA350 expansion box.
Turn the On/Off switch
unit to the On ( | ) position, as shown in Figure 6–1.
Description
Turn the terminal power switch to the On position ( | ).
Turn on the power switch to any other devices, such as
a BA350 expansion box.
Turn the On/Off switch
unit to the on ( | ) position, as shown in Figure 6–1.
on the front of the system unit
on the front of the system
on the front of the system
comes on, see