DEC 3000 800 Owner's Manual page 152

The boot Command
Example: The following commands indicate how to:
TURBOchannel
•
boot
Commands
•
•
•
•
9–12 Using Console Commands
boot from a TURBOchannel Ethernet option card in
TURBOchannel slot 1, using the MOP protocol:
>>> boot "1/esa0"
Return
boot from a TURBOchannel SCSI option card in
TURBOchannel slot 1, using the BOOTP protocol:
>>> boot "1/ez0"
Return
boot from device dka400 connected to TURBOchannel slot 2:
>>> boot "2/dka400"
Return
perform a MOP boot from a device connected to
TURBOchannel slot 3:
>>> boot "3/esa0" -fi "filename.sys"
perform a BOOTP boot (tftp) from a device connected to
TURBOchannel slot 4:
>>> boot "4/ez0" -fi "/tmp/vmunix"
Return
Return