Cable Approval; Connector Pin Layout - DEC 3000 800 Owner's Manual

Cable Approval

Cable Approval
The 54-21147 module is approved for direct connection
Cable
Connection to to a particular digital circuit. This approval includes an
Digital Circuits interconnecting cable with mating connectors that conform to
the British standard BS6623, parts 1 and 4. If the module
is connected to the service with anything other than its own
approved cables, those cables must benefit from relevant
general approval NS/G/1235/100009 and/or conform to any other
applicable requirements.
Figure E–1 shows the pin layout for the connector.
Connector
Diagram
Figure E–1 Connector Pin Layout
E–6 Special Information for PTT Network Users
1
14
13
25
MLO-008585