Where To Go Next; Problems When Booting From The Network - DEC 3000 800 Owner's Manual

Table of Contents

Advertisement

Unable to Boot
If you are unable to boot from the network, but there is no error
from Network
message on the system startup display, see Table 13–20.
Table 13–20 Problems When Booting from the Network
Possible Cause
Local network problem.
Defective network interface.
To test for a network problem, type
After Solving
key to run the Ethernet test again. This either clears the error
an NI Problem
or displays a message to let you know the problem still exists.

Where to Go Next

Determine Your
If you were unable to resolve your problem using the information
Next Task
in this chapter, contact Digital Services (instructions are
provided in Chapter 14), or run system tests, also described in
that chapter.
Network Problems
Corrective Action
Check the customer server system or
the network.
Refer to Chapter 14 for information on
running diagnostic tests.
and press the Return
test ni
Identifying a Problem 13–29

Advertisement

Table of Contents
loading

This manual is also suitable for:

3000 800s3000 900 axp

Table of Contents