Connecting The Aui Ethernet Cable To The Decxm Transceiver - DEC 3000 800 Owner's Manual

Connecting to a 10BASE2 Network
Connect an AUI Ethernet cable to the AUI port on the rear of
Step 2:
Ethernet Cable the system unit, shown in Figure 5–1 of this chapter.
Step 3: Connect the other end of the AUI Ethernet cable to the AUI port
on the DECXM transceiver as shown in Figure 5–3.
DECXM
Transceiver
Figure 5–3 Connecting the AUI Ethernet Cable to the DECXM
5–8 Connecting the System to a Network
Transceiver
MLO-011208