The Show Device Display - DEC 3000 800 Owner's Manual

Changing the Default Boot Device (bootdef_dev)
To set the
Command
Syntax command:
>>> set
Enter the device from which you want your system to boot. If
you do not know which devices your system contains, enter the
show device
Listing To see a list of devices installed in your system, issue the
Available
device
Devices key. The system responds with a display similar to the one
shown in Figure 10–1.
Figure 10–1 The show device Display
>>> show device
Understanding The
the show information. The sample
device Display there is one RZ26 device with device name DKA0, three RZ25
devices with device names DKA100, DKA200, and DKA300, and
one RRD42 device with device name DKA400 installed in the
system. For a complete description of the
see Chapter 14.
10–8 Changing Environment Variables
environment variable, enter the following
bootdef_dev
bootdef_dev
device
command as the next section explains.
command at the console prompt and press the Return
Return
BOOTDEV ADDR DEVTYPE
------- ---- -------
ESA0 08-00-2B-12-00-9C
DKA0 A/0/0 DISK
DKA100 A/1/0 DISK
DKA200 A/2/0 DISK
DKA300 A/3/0 DISK
DKA400 A/4/0 RODISK
..HostID.. A/7 INITR
..HostID.. B/7 INITR
command displays several columns of
show device
Return
NUMBYTES RM/FX
-------- -----
1.05GB FX
426.25MB FX
426.25MB FX
426.25MB FX
..... RM
show device display indicates that
show device
show
WP DEVNAM REV
-- ------ ---
RZ26 T368
RZ25 0700
RZ25 0700
RZ25 0700
WP RRD42 4.3d
command,