Changing The Default Startup Action (Auto_Action) - DEC 3000 800 Owner's Manual

Changing the Default Startup Action (auto_action)

The default setting for the
Default Setting
depends on whether your system is preconfigured at the factory
with factory-installed software. All preconfigured systems,
workstation and server configurations, are set to BOOT, all other
systems are set to HALT.
Command To set the
Syntax command:
>>> set
Enter the parameter of your choice from Table 10–2 to set the
default startup action.
Command This command sets the default startup action to halt at the
console prompt each time your system is turned on. The system
Example
responds with a confirmation of the action you have chosen.
>>> set auto_action 3
AUTO_ACTION = HALT
>>>
10–6 Changing Environment Variables
environment variable, enter the following
auto_action
auto_action
parameter
Return
Return
environment variable
auto_action