System Device Errors - DEC 3000 800 Owner's Manual

The show error The
Command error that is occurring within your DEC 3000 Model 800/800S
/900 AXP system.
Table 13–11 lists the devices that the
provides information about.
Table 13–11 System Device Errors
Test Name
ASIC
MEM
NVR
SCC
NI
SCSI
ISDN
TCn
1
Error information about TURBOchannel devices is not displayed
by the
600/600S AXP and 800/800S AXP Service Information and
the DEC 3000 Models 700 AXP and 900 AXP Service/Upgrade
Information Addendum for error information on TURBOchannel
devices.
command displays specific information about any
show error
Device Tested
Application-specific integrated circuit
Memory
Non-volatile RAM and time-of-year (TOY) clock
Serial communications controller
Network interface (Ethernet)
SCSI device(s)
1
79C30A AMD chip
TURBOchannel options, where n is the number of
the TURBOchannel device you wish to test
Running ISDN diagnostic tests also tests the audio port
show error command. Refer to the DEC 3000 Models
Interpreting the show Command Display
show error
Identifying a Problem 13–19
command