Connecting The Thinwire Cables And T-Connector To The Decxm Transceiver Or A Desta Unit - DEC 3000 500 Owner's Manual

Connecting to a ThinWire Network
Connect the ThinWire network cables to the T-Connector and
Step 4:
ThinWire then the T-connector to the DECXM transceiver
unit
Cables and
T-Connector
Figure 5–4 Connecting the ThinWire Cables and T-Connector
If your workstation is the last one on a ThinWire network, you
Step 5:
need to terminate the network connection. Do this by connecting
Terminate
Connection a terminator, rather than a ThinWire network cable, to one side
of the T-connector on the DECXM transceiver
unit
5–10 Connecting the System to a Network
unit, as shown in Figure 5–4.
to the DECXM Transceiver or a DESTA Unit
1
, as shown in Figure 5–5.
, or a DESTA
2
, or a DESTA
MLO-010368