Eaton Network-MS User Manual page 69

www.eaton.com
1. Select the Week number, Day, Month, and Time for which daylight saving time should start. For
example, if daylight saving time starts the second Sunday of March at 2:00 am, select Second Sunday
and March, and then enter 02:00.
2. Select the Week number, Day, Month, and Time for which daylight saving time should end. For
example, if daylight saving time ends the first Sunday of November at 3:00 am, select First Sunday, and
November, and then enter 03:00
Note 1:
The even the card is used in a UPS supporting time-stamping, the card's time is automatically synchronized with
that of the UPS.
Note 2:
After start-up, if the card is in manual mode or if no NTP server was reached, the card initializes at 01/01/1970.
Network Management Card
– User Manual 34003991XT_EN/JC
Network
Management Card
(Network-MS)
User Manual
Page
69/143