E-Mail Message Settings - Eaton Network-MS User Manual

www.eaton.com

4.3.2 E-mail Message Settings

This page enables customisation of the content of the messages received by recipients of e-mails sent by the
card.
Customisation is common to the four recipients that can be notified (see
Sender: (59 characters maximum) identifies the source of the message. The default value is
•
ups@domain.com.
This field is free. However, depending on the type of SMTP server configuration, it is possible that the
server checks that the domain name contained in the Sender address exists, and even that the user in
the Sender address belongs to this domain.
Subject: enables the user to specify the subject of the e-mail to be sent. By entering some free text and
•
selecting from several optional fields, if desired, the message subject is built:
- UPS name recalls the name of the UPS; it may or may not be selected.
- UPS location recalls the geographic location of the UPS (see System Settings); it may or may not be
selected.
- Event message identifies the event generating the e-mail; it may or may not be selected.
Message text is a free zone long of 255 characters maximum.
•
The body of the e-mail sent is composed of:
- Message text, which is free text.
- The date and time of the event, as saved in the log.
- URL of the card, enabling a direct link with the card to be established.
- Attachments, as configured for the e-mail recipients.
- Duplication of the subject, as configured.
Network Management Card
– User Manual 34003991XT_EN/JC
Network
Management Card
(Network-MS)
User Manual
E-mail notification).
Page
49/143