License Plate Light; Map Light - Subaru CROSSTREK HYBRID 2016 Owner's Manual

License plate light

1. Insert a finger into the right side of the
license plate light cover, then press once
to the left and pull out to remove the cover.
2. Turn the bulb socket counterclockwise
and pull out the socket.
3. Pull the bulb out of the socket.
4. Install a new bulb.
5. Reinstall the bulb socket and the
license plate light cover.

Map light

Type A
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
Maintenance and service/Replacing bulbs
2. Turn the bulb until the flat surfaces at
its ends are aligned vertically. Pull the bulb
straight downward to remove it.
3. Install a new bulb.
4. Reinstall the lens.
11-43
CONTINUED